(An ISO 9001:2015 Certified Co.)
| Hanger | |
|---|---|
| Description :- This conveniently holds flexible shaft tools, which conserves valuable workspace The base can be screwed into your work bench ( please delete word Foredom ) | |
| Code | Sizes |
| 075 | Hanger for flexible shaft Motors |
| hanger | |
|---|---|
| Description :- This conveniently holds flexible shaft working both sides which conserves valuable workspace The base can be screwed into your work bench | |
| Code | Sizes |
| 075A | Hanger for 2 flexible shaft Motors |
| hanger | |
|---|---|
| Description :- This special designed hanger to be mounted directly on the top of bench. The upright post are fixed and the top hanger can swivel. We found this is very useful for moving the tool out of way when not in use. | |
| Code | Sizes |
| 075B | Hanger for Flexible Shaft Heavy Round Base Chrome finish. |
| Fordom Hand | |
|---|---|
| Description :- | |
| Code | Sizes |
| 075C | Fordom type Hand Pc Holder |
| Foredom Type Flexihanger | |
|---|---|
| Description :- | |
| Code | Sizes |
| 075D | Foredom Type Flexihanger for 2 Motor |
| Bracelet Holder | |
|---|---|
| Description :- Aluminum holder with black oxidized finish. Can hold bracelet of 2.50MM to 7.00MM. Internal diameter is 83.00MM. BRACELET HOLDER Aluminum holder with black oxidized finish. Can hold bracelet of 2.50MM to 7.00MM. Internal diameter is 83.00MM | |
| Code | Sizes |
| 076 | Bracelet Holder Aluminium |
| Bangle Holder | |
|---|---|
| Description :- Bangle Holder | |
| Code | Sizes |
| 077 | Wooden bangle holder |
| Machinist Square | |
|---|---|
| Description :- In use, the body is aligned against the one edge of the object and the blade is presented to the end or body of the object. If the end is being checked, then a strong light source behind the square will show any mismatch between the blade of the square and the end of the object. The purpose of this action is to either check for squareness or to mark out the body of the workpiece. | |
| Code | Sizes |
| 1401 | Machinist Square 1” |
| 1402 | Machinist square 2" |
| 1403 | Machinist square 3" |
| 1404 | Machinist square 4" |
| 1405 | Machinist Square 6” |
| 1406 | Machinist Square 8” |
| 1407 | Machinist Square 10” |
| 1408 | Machinist Square 12” |
| Engro Tool | |
|---|---|
| Description :- Engro Tool | |
| Code | Sizes |
| 080 | Engro tool for etching on metal,AC 220, 50 cycles |
| Labels (Tags) | |
|---|---|
| Description :- Labels (Tags) | |
| Code | Sizes |
| 082 | Labels (tags) with Thread No. 1 (1000 pcs) |
| 083 | Labels ( tags ) with Thread No. 2 & 3 (1000 pcs) |
| Labels Rigid Plastic | |
|---|---|
| Description :- Labels Rigid Plastic | |
| Code | Sizes |
| 084 | Labels rigid plastic with thread (1000 pcs) |
| Claw Setting Kit | |
|---|---|
| Description :- The Required Number of the wire are inserted into the slots and then gripped by the retaining ring. The ends are to be soldered together. The retaining ring is then withdrawn. The setting is removed and cut to the desired length. All accessories are blackened steel. | |
| Code | Sizes |
| 085 | Claw setting manufacturing kit, Set of nine in cardboard box, consist of (1). 5 wire holder 4-6-8 slots (2). 4 Retaining tubes (3). 1 Main base |
No part of website would be reproduce or copied without written consent of SUNRISE TOOLS INDIA PVT. LTD.
Back