(An ISO 9001:2015 Certified Co.)
| Flux Dispenser Plastic | |
|---|---|
| Description :- Flux Dispenser Plastic | |
| Code | Sizes |
| 086 | Flux dispenser plastic capacity 2 oz |
| channel setting | |
|---|---|
| Description :- channel setting | |
| Code | Sizes |
| 087 | channel setting for flexi shaft motors handpiece |
| Screw Plate | |
|---|---|
| Description :- This handy tap and die set comes with fourteen different taps and a large screw plate that allow you to thread wire, re-thread stripped threads on screws, and even thread cases. Perfect for working on small pieces that jewelers and watchmakers commonly run into. Now you can repair stripped and damaged threads that were unrepairable before | |
| Code | Sizes |
| 088 | Screw plate with 5 hole and taps |
| 089 | Screw plat 0.6/ 0.7/ 0.8/ 0.9/1mm and taps |
| Screw Plate | |
|---|---|
| Description :- Screw Plate | |
| Code | Sizes |
| 090 | Screw plate with 14 taps, holes size 0.70mm to 2mm |
| Screw Plate | |
|---|---|
| Description :- Screw Plate | |
| Code | Sizes |
| 090A | Screw plate with 14 taps, holes size 0.70mm to 2mm in wooden box |
| Screw Plate | |
|---|---|
| Description :- Screw Plate | |
| Code | Sizes |
| 090B | Screw plate with 19 taps, holes size .... |
| High Quality Tap & Die | |
|---|---|
| Description :- High Quality Tap & Die | |
| Code | Sizes |
| 091 | High quality tap & die set for Jewellers: 1/16" BSW |
| Stone Holder | |
|---|---|
| Description :- Stone Holder | |
| Code | Sizes |
| 092 | Stone holder in chrome or golden |
| Automatic Center Punch | |
|---|---|
| Description :- Use automatic center punches to precisely punch material for drilling and layout work. Spring operated tool drives hard point in a single one-handed operation that eliminates striking a punch with a hammer. Spring tension cap can be adjusted for light to heavy strokes. Punch depth can be set for repetitive work. This is a steel automatic center punch for making lighter markings than #78. It has a black oxide finish that inhibits rust. The all-steel body is 5" with threaded, replaceable hardened steel point and shaft. The body diameter is 1/2". | |
| Code | Sizes |
| 4901 | Automatic center Punch |
| 4901A | Nickeled Automatic center Punch |
| Automatic Center Punch | |
|---|---|
| Description :- | |
| Code | Sizes |
| 4901B | Automatic center Punch brass body nickelled plastic end cap |
| Automatic Center Punch | |
|---|---|
| Description :- | |
| Code | Sizes |
| 4901C | Hammerless spring tools double ended prick punch & center punch |
| TAP HANDLE MINI SPECIAL | |
|---|---|
| Description :- TAP HANDLE MINI SPECIAL | |
| Code | Sizes |
| 2991 | Tap Handle Mini Special 1/4" |
| Tap Holder | |
|---|---|
| Description :- Tap Holder | |
| Code | Sizes |
| 2992 | Tap Holder 1/4" |
| 2993 | Tap Holder 3/8" |
| 2994 | Tap Holder 1/2" |
| 2995 | Tap Holder 3/4" |
| Blow Pipe | |
|---|---|
| Description :- Blow Pipe | |
| Code | Sizes |
| 095 | Blow Pipe brass 12" |
No part of website would be reproduce or copied without written consent of SUNRISE TOOLS INDIA PVT. LTD.
Back